New LHR21 & LHR15 Mark III

LHR 21 Mark III
With its 21mm orbit and its Ø150mm backing pad, the LHR 21 MarkIII random orbital polisher is the perfect tool for working large surface areas. The LHR 21 MarkIII allows the operator to achieve ultra-high quality finishes, even with limited passes.

Improved efficiency guarantees more power and torque on every surface.


LHR 15 Mark III
Built to handle any detailing situation, the new LHR 15 MarkIII is the new frontier of detailing. The ergonomic design allows for precise paint correction with complete comfort, in curved surfaces and difficult to reach areas. The LHR 15 MarkIII operates at a higher rpm compared to the LHR21 MarkIII. This increased speed provides equivalent correction and does so with a pad diameter and orbit that are more conducive to curved or varied surfaces.



The rubberized front grip of the MarkIII offers exceptional comfort for the operator while providing a non-slip surface for control. The improved rear handle also integrates rubberized surfaces for improved feel.

Two strategically placed, non-marking, tool rests provide stability when the tool is not in use as well as additional protection against unintended impact.

The continued refinement of the BigFoot random orbital platform in MarkIII reinforce its best in class reputation, making the best even better.




The new electronic speed control dial allows for easy adjustment of the top speed of the polisher without requiring the operator to move his hands.

The larger dial is easily adjusted with a move of the thumb.

High visibility numbers and a more positive feedback from the movement of the dial make speed changes feel more deliberate, allowing operators to selectthe ideal speed for the task without any interuption to the polishing process.




Adding an additional layer of control is the new progressive trigger.

Acting as a throttle to control speeds within the dial range, the progressive trigger allows the operator to make subtle adjustments for precise control without interruption of the process or need to reposition the grip to access the speed dial.




Attention to detail is something more than just attractive design. Every detail, such as the rubber support positioned on the body of the machine to keep it stable during the non-working stages, is the result of meticulous research aimed at achieving maximum operator comfort.



The highly efficient motor of the MarkIII BigFoot Random Orbital Polisher produces a speed range of 3000 to 4500 for the 21mm models and 3000 to 5200 for the 15mm models. The specially engineered and custom wound motor, created in-house by RUPES, generates high levels of torque while requiring just 500 watts of input. This results in RUPES offering the most efficient motor in random orbital polishing today.

Technical data LHR 21 Mark III
Ø backing pad mm-in 150 – 6”
Ø Orbit mm-in 21 -13/16”
Power Watt 500
R.P.M. 3000 – 4500
Weight kg-lbs 2,7 – 59,5
Speed regulation
Backing pad thread M8
Cord Length m-ft 9 – 29,5
Technical data LHR 15 Mark III
Ø backing pad mm-in 125 – 5”
Ø Orbit mm-in 15 -19/32”
Power Watt 500
R.P.M. 3000 – 5200
Weight kg-lbs 2,6 – 57,3
Speed regulation
Backing pad thread M8
Cord Length m-ft 9 – 29,5
newest oldest most voted
Notify of

How much will cost to order one of New LHR21 & LHR15 Mark III

Francesco Ginocchio

The price is set by the reseller. So you should ask to your dealer or search on line


How much will cost one of New LHR21 & LHR15 Mark III?

Francesco Ginocchio

Price is set by the reseller. You can find the list of our distributors following thi link


Can I buy this in the USA AND WHERE ? Thx

Francesco Ginocchio

Here the list of our distributors worldwide, USA included: Price is set by the reseller.

Em lisboa tem esta maquina rupes lhr 21 mark 3
E qual o valor dela


When this will be available ?

Francesco Ginocchio

It’s available already!

George Bicket

I am looking for a polisher to smarten up a Yachts Gelcoat. Given that you have included a progressive trigger and that I have read elsewhere that this machine will run down to 100RPM would you recommend it or the LH18ENS for this job. Thank you.

Francesco Ginocchio

Actually the new rotary with all the features you need is the LH19…I strongly suggest it for thsi kind of job, very light and powerfull at low speed


Mark III works at the 100V?

Marco Garavaglia

the MarkIII is available in 230 , 120 and 100 Volt, with a different plugs according the needed of each country around in the world


When will this be available in a kit?

Francesco Ginocchio

Hi Sam… the MarkIII is already available in kit.


Just purchase a MK III.

Q. WHY is doesnt the cord detach from the polisher?

It gets dragged all over the ground, and then it has to go into the bag with the tool and clean pads / rags.

Why not make it detach so you can put it in a seperate bag?

ahmad hani hisham

do they run on 220 volts ?

Marco Garavaglia

We have different versions of this tool, with motor can work at 220/230V – 100V or 120V
be care where you buy the tool, because the tool have the Technical features according the country where you buy.


What is the voltage of this machine in usa? My country uses 220v. I want to buy from ebay

Marco Garavaglia

the tool sold in USA is 120V 60Hz,verify the technical feature before to proceed with purchase


how mach mani

Hello Amir,
we do not sell directly. If you want to know the price of our products, please contact one of our local distributors worldwide. You can find the closest to you at the following link:

Mariela Juana

How much weihgt

Mariela Juana

How much weight there says kg-lbs kg 2,7 – (lbs)59,5 wha is the right information????