Phase II Skills Validation testing demonstrates hands-on skills and in-person testing by an IDA Recognized Trainer (RT) in areas covered in the written exams: Wash Bay/Prep, Interior, Exterior Correction, and Finishing Steps. Each portion of the test will be a one-on-one teacher-to-student session.
This Skills Validated (Phase II) event will be led by Fabrizio Gagliardi, IDA CD-SV-RT / Training Manager for RUPES, and space is limited to just 4 registrants.

IMPORTANT NOTES, PLEASE READ THE FOLLOWING CAREFULLY:
• You must register for this event through the IDA using the registration link below. Registration and payment are coordinated with the IDA, RUPES will host the event and provide the testing.
• You must have already completed/passed your CD (Phase I) IDA Certification prior to participation in the SV Phase II exam. Visit the IDA website for more information on CD (Phase I) certification: https://the-ida.com/page/certification
• This is a certification event, not training or education.
• All testing supplies are provided. You do not need to bring tools, equipment, or supplies with you.
• The SV exam takes approximately 2 hours to complete. Budget your time accordingly.

REGISTER NOW

L'articolo IDA CERTIFICATION SKILLS VALIDATED EXAM | AT THE BIGFOOT DETAILING ACADEMY proviene da Rupes tools.

WEBINAR IN ITALIAN | ROUND TABLE DISCUSSION

DECEMBER 3rd, 2020 – 1 pm / 13:00 (Italy time)

Don’t miss the opportunity to attend this meeting on December 3rd with some of the best experts in the fields of Detailing and Car Body Shop. We will find out how they arrived in this field, how they developped their skills, how they entered the RUPES Family, and how this sector is evolving over time. You will have the possibility to interact with questions.

REGISTER NOW: https://tinyurl.com/yxrq8s9m

If you cannot log in for the live broadcast, don’t worry! Register and you will be sent an email to watch an on-demand recording of the event at your convenience.

The event will be simulcast to Facebook live, but you must register and attend the webinar if you want to ask questions or receive the on-demand link afterward.

MODERATORS

• Fabrizio Gagliardi – Training Manager RUPES
• Giuseppe Cintura – Area Manager RUPES

GUESTS

• Ginevra Canu – Application Engineer RUPES
• Carlo Genoli – Application Engineer RUPES
• Marco Bassini – Official Trainer
• Marco Giglietti – Official Trainer
• Manuela Musumeci – Official Trainer
• Andrea Bonavita – President of Detailing Italia
• Giada Debri – Car Body Shop Technician who uses RUPES

L'articolo Webinar in Italian | ROUND TABLE DISCUSSION proviene da Rupes tools.

WEBINAR EN ESPAÑOL | MESA REDONDA RUPES

NOVEMBER 27 2020, 22:00 – 10 pm (SPAIN TIME)

RUPES would like to invite you for our next Webinar presented in Spanish. During this round table, our Technical Team will have a discussion about Detailing with the Official Technicians of RUPES in South America and Europe. You will have the opportunity to learn about their beginnings in Car Detailing, how they developed their career, and also how RUPES helped them on the path to become Professional Detailers.

REGISTER NOW: https://tinyurl.com/y64jghdd

RUPES Moderators

• Fabrizio Gagliardi – RUPES Training Manager
• Arturo Porto Arca – RUPES Area Manager

Round Table Guests

• Florin Iosef – España
• Damian Amarante – Uruguay
• Carlos Costa – Portugal
• Andres Reyes – Mexico
• Franco Lombardo – Argentina
• Jose Saez – Chile

The C.O.R.E. Series webinars are presented to a global audience. Please use the information provided below as a reference for when the live broadcast will be in your area:

• Mexico City: NOVEMBER 27, 15:00 – 3 pm
• Lima: NOVEMBER 27, 16:00 – 4 pm
• Santiago, Montevideo, Buenos Aires: NOVEMBER 27, 18:00 – 6 pm
• Lisbon: NOVEMBER 27, 21:00 – 9:00 pm
• Madrid, Barcelona: NOVEMBER 27, 22.00 – 10:00 pm

If you cannot log in for the live broadcast, don’t worry! Register and you will be sent an email to watch an on-demand recording of the event at your convenience.

The event will be simulcast to Facebook live, but you must register and attend the webinar if you want to ask questions or receive the on-demand link afterward.

L'articolo Webinar in Spanish | ROUND TABLE DISCUSSION proviene da Rupes tools.

Which is better? Do you need both? When should you use one or the other? In the category of dual-action orbital tools, two sub-categories exist; gear-driven and random orbital, but do you know how that difference impacts performance? In this edition of the RUPES C.O.R.E. Series webinars, our technical team takes a complete look at both tool movements, the specific advantages of each, and when they are the optimal choice in various applications.

Panelists for this discussion:

Jason Rose – Global Director of Training

Fabrizio Gagliardi – Training Manager

Todd Helme – Technical Specialist

The C.O.R.E. Series webinars are presented to a global audience. Please use the information provided below as a reference for when the live broadcast will be in your area:

• Los Angeles – October 8th at 7:00 am
• Denver – October 8th at 8:00 am
• Chicago – October 8th at 9:00 am
• New York – October 8th at 10:00 am
• London – October 8th at 3:00 pm
• Milan – October 8th at 4:00 pm
• Moscow -October 8th at 5:00 pm
• Beijing – October 8th at 10:00 pm
• Sydney – October 9th at 12:00am

Register now

If you cannot log in for the live broadcast, don’t worry! Register and you will be sent an email to watch an on-demand recording of the event at your convenience.

The event will be simulcast to Facebook live, but you must register and attend the webinar if you want to ask questions or receive the on-demand link afterward.

L'articolo C.O.R.E. Series Webinar | GEAR DRIVEN VS. RANDOM ORBITAL proviene da Rupes tools.