Which is better? Do you need both? When should you use one or the other? In the category of dual-action orbital tools, two sub-categories exist; gear-driven and random orbital, but do you know how that difference impacts performance? In this edition of the RUPES C.O.R.E. Series webinars, our technical team takes a complete look at both tool movements, the specific advantages of each, and when they are the optimal choice in various applications.

Panelists for this discussion:

Jason Rose – Global Director of Training

Fabrizio Gagliardi – Training Manager

Todd Helme – Technical Specialist

The C.O.R.E. Series webinars are presented to a global audience. Please use the information provided below as a reference for when the live broadcast will be in your area:

• Los Angeles – October 8th at 7:00 am
• Denver – October 8th at 8:00 am
• Chicago – October 8th at 9:00 am
• New York – October 8th at 10:00 am
• London – October 8th at 3:00 pm
• Milan – October 8th at 4:00 pm
• Moscow -October 8th at 5:00 pm
• Beijing – October 8th at 10:00 pm
• Sydney – October 9th at 12:00am

Register now

If you cannot log in for the live broadcast, don’t worry! Register and you will be sent an email to watch an on-demand recording of the event at your convenience.

The event will be simulcast to Facebook live, but you must register and attend the webinar if you want to ask questions or receive the on-demand link afterward.

L'articolo C.O.R.E. Series Webinar | GEAR DRIVEN VS. RANDOM ORBITAL proviene da Rupes tools.

Our Training Team composed of Jason Rose, our Global Training Director and Fabrizio Gagliardi, our Training Manager have scheduled this session for Monday, February 25th (duration 40 minutes).

This session will focus on how large stroke random orbital polishers have, in a short time, revolutionized the way technicians correct and finish surfaces. The BigFoot large orbit polishing technology pioneered by RUPES has forever changed the expectations for performance and capability in the polisher category, but many users don’t understand how orbit can impact cutting or finishing in both sanding and polishing operations.

In this C.O.R.E. Series Webinar the RUPES Global training team, led by Jason Rose and Fabrizio Gagliardi, will cover the various aspects of orbit, specific advantages and disadvantages, and when to choose one orbit size over another. New BigFoot Mark III tools will be featured.

This webinar is a great learning opportunity for professionals in both the detailing and body-shop industries, as well as hobbyists looking to gain a better understanding of random orbital movements. It will also be good guidance for someone trying to make a decision on which tool is right for them.

If you would like to participate, please pre-register to the session:

*Note: when you select your session and click the registration button you will be redirected to a new page. The times displayed on this registration page may display in European Central Time due to the fact that RUPES is headquartered in Milan, Italy. Refer to the chart above for the relevant conversion for your time zone.

L'articolo Webinar February 25th – LHR15III VS. LHR21III proviene da Rupes tools.

Stay tuned for future webinar announcements by subscribing to our newsletter.

Here you can find the recording

L'articolo Foam, microfibre, wool: choosing the right pad proviene da Rupes tools.