BigFoot Polishing System – Polishing tools
RANDOM ORBITAL POLISHER
The backing plate follows an orbit (the amplitude of which depends on the distance between the rotation axis of the drive shaft and the central axis of the backing plate) and is free to rotate about its own central axis. The backing plate is free to rotate at varying velocities and directions by effect of the centrifugal force of the offset movement and by effect of friction.
Should the friction forces be such as to prevent rotation of the disc while the tool is still operating, the random orbital movement would simply become an orbital movement.
The number of disc rotations is variable and independent of the number of orbits performed. The random orbital movement is at present the best compromise in terms of effectiveness and surface treatment quality.
LHR21 Mark III
LHR 21 Mark III
With its 21mm orbit and its Ø150mm backing pad, the LHR 21 MarkIII random orbital polisher is the perfect tool for working large surface areas. The LHR 21 MarkIII allows the operator to achieve ultra-high quality finishes, even with limited passes. Improved efficiency guarantees more power and torque on every surface.
LHR15 Mark III
LHR 15 Mark III
Built to handle any detailing situation, the new LHR 15 MarkIII is the new frontier of detailing. The ergonomic design allows for precise paint correction with complete comfort, in curved surfaces and difficult to reach areas. The LHR 15 MarkIII operates at a higher rpm compared to the LHR21 MarkIII. This increased speed provides equivalent correction and does so with a pad diameter and orbit that are more conducive to curved or varied surfaces.
LHR21 ES
LHR 21ES
Characterised by its large Ø21mm orbit and Ø150 mm RUPES backing pad, the electric LHR 21ES random orbital polisher is perrfect for working large surface areas. The perfectly balanced polisher, combined with the Ø150/180 mm foam polishing pads of the RUPES BigFoot range, guarantees rapid cutting and an impeccable finish.
LHR15 ES
LHR 15ES
The Ø15 mm orbit and the RUPES Ø125 mm backing pad make the random orbital polisher particularly suitable for curved surfaces. The 15mm orbit of the LHR 15ES, shorter than that of its big brother the LHR 21ES, is coupled with a higher rpm level than that of the LHR 21ES. This higher speed gives the LHR 15ES equivalent cutting power to the LHR 21ES, in spite of the smaller orbit. Its Ø130/150 mm BigFoot polishing foam pads, perfect balance and vibration-free operation make the LHR 15ES a real gem and a must for the tool kit of every detailer.
LHR12E Duetto
LHR 12E DUETTO
This simple, intuitive and exceptionally comfortable tool allows any operator to tackle even the most challenging polishing operation. The LHR 12E is perfect for deep correction operations and anti-hologram passes. The 12mm orbit allows the operator exceptional control in difficult applications such as edge and profile work, making “perfect detailing” an easy operation for novices and professionals alike.
LHR75E Mini
LHR 75E MINI
The LHR 75E is the polisher for difficult shapes and for spot repair operations. The LHR 75E is a must for any detailer wishing to obtain perfect results, even in the most difficult areas. The 12mm orbit, combined with RUPES accessories and consumables, achieves quick results on areas such as mudgards, front panels, etc.
Nano IBrid
NANO iBRID
Bigfoot nano machine is more than just technology, it’s a design philosophy that will lead us into the future evolution of RUPES. iBrid ushers in an era of innovation, flexibility, versatility, and sustainability. The new iBrid manufacturing concept will increase process efficiency and optimize the user experience. The functionality of a battery and the option of corded electric supply, all without interruption of the task at hand. The dual power supply is joined by multi-action movements in the Nano that will revolutionize the approach to cleaning and detailing. The high performance motor saves energy offering optimal performance with low environmental impact and ultimately energy savings.
ROTARY ACTION
Paint fast correction on edges and profiles with
Ø30mm (1,18” in) backing pad.
Cleaning and brushing with
special accessories
DUAL ACTION Ø3mm
Micro-sanding and denibbing
Ultra high gloss polishing with:
Ø30mm (1,18”in) backing pad
Ø50mm (1,96”in) backing pad
DUAL ACTION Ø12mm
Paint correction and high gloss polishing with:
Ø30mm (1,18” in) backing pad
Ø50mm (1,96” in) backing pad
LHR75 Pneumatic
LHR 75
The small pneumatic random orbital polisher has a Ø15mm orbit and a Ø75mm backing pad, allowing the tool to work in awkward and difficult to reach areas. The reduced size and high cutting capacity, combined with the RUPES BigFoot Ø 80/100 mm polishing foam pads, make the LHR 75 the ideal polisher for spot repairs, polishing contoured areas and parts such as mirrors and pillars.
GEAR DRIVEN DUAL ACTION POLISHER
Gear driven the backing plate follows an orbit (the scope of which depends on the distance between the rotation axis of the drive shaft and the central axis of the rotor disc) and is at the same time constrained to rotate about its own central axis (typically due to the inclusion of a gearing).
The number of orbits at each revolution of the disc is always constant and depends on the parameters of the gearing used.
The gear movement is more aggressive on surfaces with respect to the random orbital movement and generates a generally higher vibration level.
MILLE LK900E
BIGFOOT MILLE LK 900E
Joining the BIGFOOT family of tools to bridge the gap between rotary and free spinning orbital polishers the Mille provides a balance of power, ergonomics, and capability for operators who crave a gear driven solution. Featuring a wide assortment of new, innovative features as well as a revolutionary clockwise rotational movement the BIGFOOT Mille delivers powerful defect removal, versatility, and consistent performance in an ergonomic package designed with operator comfort and efficiency of work in mind.
TRIPLE ACTION POLISHER
RUPES is offering a new type of movement known as Triple Action. The power of a motor can be expressed as the product of the torque multiplied by the velocity. During normal use of a tool, the operator applies a variable load, which by effect of the friction forces and the work carried out by the motor might be such as to reduce the number of revolutions of the motor.
The load applied by the operator during normal use of a tool varies significantly over a measure of time, causing large variations in velocity of the number of orbits and the rotation of the rotor disc and consequently reducing the uniformity and effectiveness of the work operation.
A more homogeneous process leads to a significant reduction in working times. In the case of triple action tools, and similar to the movement of random orbital tools, the disc follows an orbit and is free to rotate about its own central axis but, thanks to a special epicyclic gear reducer located in front of the cam group, the torque value is significantly increased while at the same time the velocity is reduced.
With the use of this solution the impact of a variable in performance (the load applied by the user) is substantially minimized and, consequently, a greater uniformity of performance of the tool. This provides a considerable improvement in the surface finish as well as a drastic reduction in the vibration levels. From the very first use it is clear how advantageous this configuration is in terms of effectiveness and vibration reduction all thanks to the introduction of the epicyclic gear reducer; this is a technical improvement that so profoundly improves and changes the functionality of the tool that it merits a new movement category, the TRIPLE ACTION.
LTA125 - LTA75
BIGFOOT LTA 125 – LTA 75
Ergonomic, lightweight, and powerful. The LTA125 introduces a new innovative technology defined as “Triple Action” in the pneumatic polisher category. The dual action random orbital movement of this pneumatic tool is combined with epicyclic gearing that delivers levels of torque and consistency, which were previously never carried out with pneumatically powered tools. This machine provides incredible balance and torque and is extremely intuitive and easy-to-maneuver and can be used for polishing operations in several industries that include automotive detailing, aviation, marine, industrial, and many more.
ROTARY POLISHER
A rotating disc, rotates on a central axis with the highest velocity being at the pads edge. Rotary tends to be the most invasive movement on the surface, generating substantial friction and heat which can lead to burns, strike throughs, and rotary induced swirl marks if used improperly.
In the hands of a skilled technician a rotary tool features the lowest vibration levels of any tool movement, but can take a great deal of time to learn to use the tool properly. Rotary movement is most commonly used for polishing operations.
LH 19E
BIGFOOT LH 19E
Featuring a high torque motor, compact design, premium ergonomics and a lightweight housing, the LH 19E is one of the most capable and maneuverable rotary polishers on the market. Its lightweight and powerful design makes it the ultimate rotary polishing solution for a variety of industries including automotive detailing, collision repair and refinishing, marine, and more.
Nano iBrid
NANO iBRID
Bigfoot nano machine is more than just technology, it’s a design philosophy that will lead us into the future evolution of RUPES. iBrid ushers in an era of innovation, flexibility, versatility, and sustainability. The new iBrid manufacturing concept will increase process efficiency and optimize the user experience. The functionality of a battery and the option of corded electric supply, all without interruption of the task at hand. The dual power supply is joined by multi-action movements in the Nano that will revolutionize the approach to cleaning and detailing. The high performance motor saves energy offering optimal performance with low environmental impact and ultimately energy savings.
ROTARY ACTION
Paint fast correction on edges and profiles with
Ø30mm (1,18” in) backing pad.
Cleaning and brushing with
special accessories
DUAL ACTION Ø3mm
Micro-sanding and denibbing
Ultra high gloss polishing with:
Ø30mm (1,18”in) backing pad
Ø50mm (1,96”in) backing pad
DUAL ACTION Ø12mm
Paint correction and high gloss polishing with:
Ø30mm (1,18” in) backing pad
Ø50mm (1,96” in) backing pad
